Welcome to Shenzhen Anycon Electronics Technology Co., Ltd !

Intelligent Voice flying squirrel remote controller code


1, the bottom of the remote control power switch to the ON key position, the blue LED light flashes five times, then the remote control can work mode.
2, the remote control power within 30 seconds, press and hold the [AM SWTICH] key, [+] and hold volume for about 3 seconds, wait for the LED lights up after release. The remote control to enter the code states.
3, the device end into the USB receiver to begin code.
4, after the success of the code of the LED light is off, flashes three times, this remote control can work properly.
5, as the code is not successful within 30 seconds, LED lights directly off, re-enter the code again state code.
Note: The remote control and receiver pair factory, so the first time you use does not need to re-pair.

Keywords:Intelligent ,Voice, flying
linkedin share pinterest share Facebook share twitter share gplus