Welcome to Shenzhen Anycon Electronics Technology Co., Ltd !
(0086)755-28895686

The phone into a universal infrared remote control production tutorial

 post:2015-09-01


Prepare ingredient

1,940nm infrared emission control on a scrap of remote control demolition
2,3-pole phone headset plug on the headset without demolition, easy to weld three levels
3,solder tool [electric iron, solder wire]
Two infrared emission control is not to fill 38 kilohertz, the same voltage, emission depends on the distance the light emitting diode chip cross-sectional area, the infrared light-emitting chip set and two pins connected to the lamp cup in general, the size of the light-emitting chips 10,12,14mil, with two launch tube launch tube only increased cross-sectional area, and thus have a better remote control effect, not the non-use of two launch tubes.

Double-infrared light-emitting diode, in fact, is equal to two light-emitting diodes opposite polarity in parallel, work is only one light-emitting diode, and can not increase the transmission distance, the same cross-sectional area, since remote code wizard to launch tubes are positive and negative directions of the output once so impure in the positive and negative issues, dual infrared tube was fired the same set of encoding at different times, so that the double-infrared tube is completely gimmick, it is not necessary.

Welding is completed started:

Remote control TV brand: Skyworth, Hisense, Konka, TCL, Changhong, Haier, Sony, LG, Sharp, Samsung, Panasonic, Philips, Toshiba, Hitachi
Remote control air conditioning brands: Gree, Midea, Haier, TCL, Changhong, Zhi Gao, Kelon, Oaks, Hisense, Konka, Chunlan, Aucma, Electrolux, Shinco, Whirlpool, Daikin, Mitsubishi, Panasonic, Galanz, Hitachi, LG
STB remote control: Skyworth, Huawei, Coship, DVN, ZTE, Changhong, Konka Kyushu, Motorola, Cisco, Haier, UOB, the ADB, nine joint, panoramic UT Starcom, Hisense, flying, flames, Hangzhou Yulon, Jinya technology, tide, Sina,
Instructions
One, Andrews phone system instructions
1) Software Downloads
To each Android application market, such as pea pods, and other application market, download the "Remote Control Wizard", and installation;
2) Phone settings
To view the phone settings, music, sound settings, Dolby sound, balanced sound, mixing, volume restrictions audio software closing, or may not be available. Software settings, the device selection is set to smart-zaza; Advanced settings, will zaza maximum volume is set to 100%, the other not set.
3) pairing method
Plug in infrared transmitter, restart the software, if known electrical specific models can be directly output electrical model search and download, for example: US Air RN51F / BG, if you do not know the specific models or search for less, you can use automatic matching. Usage: to choose their own electrical type, then select appliance brands and models, and then press the test button to the right. Keep a distance of about 1 meter phone at the remote control of appliances to the infrared receiver window, watching appliance is reflected immediately let go, one by one test each button function, if you can use, download; if you can use, then continue to return, Press the right arrow, and then click Test. (Air conditioning, automatic matching SLR when testing is the key to open, you can hear the "drip" sound; the television, set-top boxes automatic matching tests are the volume keys, you need to keep the electrical open state, see the volume bar out,


Said electrical respond). If you have tested all codes are not reflected, Electric brand can be selected for all, because a lot of remote control codes are common, the use of automatic pairing must have patience! Such as Haier air conditioning Found pairing, paired to more than 400 groups of signals before they succeed, the current use of the US air-conditioning remote control code.


Second, Apple's mobile phone use
1) Software Downloads
It does not escape directly to the app store to download zazaremote;
Has escaped, Baidu "Remote Control Wizard Jailbreak" Jailbreak download zazaremote.
Note that must not be under the wrong software, it may not be used!
2) Phone settings
Apple Phone> Settings> Music> EQ and volume restrictions must be closed
Open the software, in the Advanced Settings is set to 100% in volume, 82% by default.
3) pairing method
Plug the IR emitter, click Add, automatic pairing screen appears, set the appliance type, brand appliances, matching DIY libraries play √, press the blue button in front of appliance, keep a distance of about 1 meter phone is aligned to the remote control of appliances IR receiver window, see appliances is reflected immediately let go, click on "further test signal", individually test each button function, if you can use, download; if you can, then continue to return and continue pairing. (Air conditioning, automatic matching SLR when testing is the key to open, you can hear the "drip" sound; the television, set-top boxes automatic matching tests are the volume keys, you need to keep the electrical open state, see the volume bar out, it means that there are electrical appliances reaction). It is possible to hear the sound when the coding has passed, you can "forward" to "back", looking just have to reflect that set of encoding. If you have tested all codes are not reflected, Electric brand can be selected for all, because a lot of remote control codes are common, the use of automatic pairing must have patience!
4) If you know the specific appliance model, you can go directly to the "Download diy remote control" download remote control code, please register and login before downloading cloud tim home, then in the local library is loaded, sometimes download code may not be used, In such cases, you can select automatic pairing tested the following phones can be used (refer only):

iPhone Series
Currently supports iPhone4, iPhone4S, iPhone5, iPhone5C, iPhone5s, iPhone6, iPhone6 Plus
All iPad models, iPad mini all models, iPod all models, the system version requires at least IOS5.1

Samsung Series

Perfect support for new Samsung mobile phones, including S5, S6, S6 Edge

Samsung mobile phones support the old i9300,9100, i9308, i739, i929, i8552, i9152, S7568,7562, i939 GALAXY SIII (telecommunications Edition), 9158,2.7.9 version,
Samsung US version R530U, unrivaled 3, Samsung GALAXYNoteII, Samsung 9308 mobile custom machine

HTC series
HTC M8, HTC M9, new HTC One (Mobile, Telecom, China Unicom), New HTC One 802w China Unicom version, New HTC One 802t mobile edition, New HTC One 802d telecom version, HTC 920E, htc x920e, HTC Butterfly, htc g11

ZTE series
Support ZTE u956, ZTE N900

Huawei series

Support the full range of glory

Support Huawei 8813C, 8813DP, Huawei c8815, T8951, Huawei Y511, Huawei A199, Huawei g610, Huawei Mate2

Motorola Series
Moto Xoom, Moto MT788, moto xt928, moto x, moto xt912, moto g, moto I939D, Motorola XT901,865

Meizu series
Support Meizu MX5, MX4 Pro, MX4, MX3, MX2, MX1

Other brands and models
Cool 7295c, Lenovo A820, Nikai En NX, Jin e5, plus a cell phone, VIVO 3S, VIVO x3t, OPPO R821, OPPO X909

We can not support the model:
HTC T328d; Lenovo P700, S899T; Samsung i879, i9000, N719; Huawei g606, U9508, P6,3C;
News xiaomi3 above models can support and, to be set up:
The first step in the headphones sound to maximum.
Step point settings - application, to a set of software called Voice deleted
The third step point setting - Sound and vibration - rice tone - Opening - General earbud, and then put all of the lower equalizer to maximum!

visit:
Keywords:phone remote control,infrared remote control
linkedin share pinterest share Facebook share twitter share gplus